A Simple Plan: Options

Method Or Recoating Hardwood Floors In the course of time, it is guaranteed that your hardwood floor will progress toward becoming scratched and dull from general wear and tear. In case your hardwood floor is fitted with polyurethane, it can normally be recoated without the requirement of sanding the whole floor at first. Recoating is essential if the floor is slightly dented and damaged, the surface has not been damaged and has no build-up of wax or other chemicals. These will bring about adhesion issues and make the floor reject the new finish which can lead to detaching and shedding. These will cause adhesion problems and cause the floor to reject the new finish which can cause peeling and flaking. A recoat is a basic methodology that includes broad cleaning and scraping to the wood floors last fitted layer of finish. Then, a new fresh layer of finish is applied. Recoating will invigorate the polish and remove any slight staining that has yet to infiltrate the timber. It restores your wood floor and lengthens the life of its defensive finish layers. It is advisable that you recoat your floor while it still looks good. This will extend the life of the floor and decrease the number of times it has to be refinished. Recoating a hardwood floor should not be mistaken for revamping a hardwood floor. The latter involves extensively sanding the floor to expose the wood, important when there are deep scratches, damage or if the floor has been waxed. To check whether your floor can be recoated, you ought to do a little patch test in a subtle zone. It is perfect to carry out the test along a wall where cleaners could have build-up. Clean the region extensively using a wood floor cleaner and then moderately sand with fine sandpaper. You ought to then remove all dust particles. You should then use polyurethane floor finish in the region and wait for one day. The finish ought to be smooth, not rippled, or with an orange shell texture. Scratch the surface with modest pressure with the use of a coin and it should not flake or peel away. If the surface fails these tests, the floor will require being extensively sanded and refinished. For recoating to happen on your hardwood floor, it needs to initially be moderately sanded with a screen disk. After that, the floor should be swept and vacuumed to take out the wood dust. You then should dampen a tack rag with pure mineral spirits and run the rag over the floor to pick up any fine dust and oily residue. At the time of fitting the finish, it is recommended you make use of a similar finish as was used to guarantee compatibility. In case the current coating is not compatible with the fresh one, there will be issues like shedding that can happen.Doing Floors The Right Way

What Research About Flooring Can Teach You